Your valued orders are welcome by e-mail or facsimile.
Be sure to mention your size, pitch and length while ordering.
The nomenclature is explained below :-
SIZE x PITCH x LENGTH SIZE x PITCH x LENGTH
1) M 10 x 1.5 x 1.5 D OR M 10 x 1.5 x 15 mm
2) M 8 x 1.25 x 1.5 D OR M 8 x 1.25 x 12 mm
D= Size of Insert.
Thus 1.5 D for M 10 = 1.5 x 10 = 15 mm
and 1.5 D for M 8 = 1.5 x 8 = 12 mm
Length of an insert is the same as the depth of your tapped hole.
NOTE : THE INSERT WILL ATTAIN ITS ACTUAL LENGTH ONLY AFTER FITMENT, as shown.
For insert sizes and their corresponding pitches, refer the table below